Advertisement
Note: All round holes should be facing up and concave holes facing down.
B3
B3
B4
B4
B5
B5
A2
A3
A1
B1
B1
NOTE:
1.
Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
STEP 2 – Assemble the support legs of swing set
Connect A1 to A7 and secure using B1, B5, B4 and B3 as shown below.
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
15
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
Advertisement
