Table of Contents
Advertisement
Choosing the installation location
Outdoor Unit
Where it is not exposed to strong wind
Well ventilated and dustless places
Where possible keep out of sunlight and rain
Where neighbors are not annoyed by operation sound or hot air
Solid wall or support that prevents vibration and is strong enough to hold the product weight
Where there is no risk of flammable gas leakage
When installing the unit at a high place be sure to fix the unit legs
3 m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated)
Install the unit horizontally
Place where drained water does not become any problem.
Place with no plants (especially climbing plants) and where small animal can not access.
Outdoor unit should not be place higher than 2.4 m or directly under eaves for accessibility for service and OH&S reasons.
• Avoid the following places to prevent malfunction of the unit
- Where there is machine oil
- Where sulfide gas exists
Wrap the refrigerant pipes and the drain hose
with the absorbent pad and vinyl tape. Refer to
page 48 for further details.
300 mm
minimum
600 mm
minimum
The appearance of the unit may be different from the diagram depending on the model.
NA_GOOD_A3050_IB&IM_EN_DB68-04387A-00.indd 30
- Salty environment such as seaside areas
- Other special atmosphere areas
125 mm
or more
You can select the direction of
draining (left or right).
'L' m as maximum pipe length
and 3 m as minimum pipe length.
(It will reduce noise and vibration)
'L' meters maximum total pipe
600 mm
length
minimum
300 mm
minimum
Make at least one round: It will help reduce noise and vibration.
English-30
300 mm or more
125 mm or
more
'H' meters maximum total
pipe height
Model
✴✴12✴✴
✴✴18/24✴✴
Pipe length
Pipe height
Minimum Maximum Maximum
3
15
8
3
30
15
11/26/2013 9:55:59 PM
Advertisement
Table of Contents
