Barox RY-LGSP28-52 Series Operating Instructions Manual page 36

Port reactivation
Reactivation of the port is effected by setting the state (in this menu) to "Enabled" and
confirmation of this action by clicking "Apply".
When doing so attention must be paid for connecting the correct device with the matching MAC
address or no terminal to the port.
Information related to the generation of several port policies:
The ACL generation for MAC addresses is a good choice in case of a low number of ports. One
policy for allowing the specific MAC address and one policy for rejecting other MAC addresses
must be generated for each port. Attention must be paid, that the switch checks all policies top -
down in each case and the sequence is maintained exactly during the configuration . Please refer
to the following example:
barox Kommunikation 36