Honeywell Home Smart RTH6580WF1003 Series User Manual page 9

Installing your thermostat
4 Remove wallplate.
Remove the old wallplate from the
wall after all wires have been labeled
and disconnected.
5 Separate thermostat and its
wallplate.
On your new thermostat, grasp the
finger holds on the top and bottom
of the wallplate with one hand and
the thermostat (front) with the other
hand. Pull pieces apart.
6 Mount wallplate for thermostat.
Mount your new wallplate using screws
and anchors included with the thermostat.
If necessary:
Drill 3/16-in holes for drywall.
Drill 7/32-in holes for plaster.
Note: You may be able to use your existing
wall anchors. Hold the wallplate up to the
existing anchors to check for alignment
Thermostat
Wallplate (back view)
7
Finger holds
PULL HERE
TO REMOVE
PULL HERE
TO REMOVE
M33856
Wallplate
69-2715EF—07
MCR33857