Using Your Air Purifier - Levoit Vital 100 User Manual

True hepa air purifier
Hide thumbs Also See for Vital 100:
Table of Contents

Advertisement

Available languages

Available languages

GETTING STARTED (CONT.)
Replace the back cover by lining up the
3.
cover's feet with the matching slots on
the bottom of the housing.
4.
Push the cover closed.
5.
Place the air purifier on a hard,
flat surface. Leave 38 cm / 15 in of
clearance to allow air to pass through
the air inlets on the sides.
Figure 1.3
38 cm /
15 in
Figure 1.4
U S I N G YO U R A I R
P U R I F I E R
General Operation
[Figure 1.3]
1.
2.
[Figure 1.4]
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
38 cm /
15 in
Plug in and tap
to turn the air purifier
on/off. The fan will start on level I.
Optionally, tap
to cycle fan speeds
between I, II, and III.
Note:
The indicators are not buttons and
cannot be used to change the
fan speed.
The fan speed indicators will light up
when active.
Fan speed III is the loudest, but cleans
air the quickest.
For best results, or to address a
specific air quality issue such as
smoke, run the air purifier at maximum
speed (level III) for 15–20 minutes
before using a lower speed.
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
Note: The air purifier will not remember
timers.
EN
7

Advertisement

Table of Contents
loading

Table of Contents