Glacier bay PPSOFSVL24M Use And Care Manual

Glacier bay PPSOFSVL24M Use And Care Manual

Vanity combo with mirror

Advertisement

Available languages

Available languages

Quick Links

TOOLS REQUIRED
Hammer
Safety goggles
Measuring tape
Wall hardware

Installation

1
PREPARING FOR INSTALLATION
NOTE: Before installation, make sure all parts are present.
Compare parts with the Hardware Included list. If any part is
missing or damaged, do not attempt to install the product.
□ Determine the desired mounting location, and mark the
wall where the unit will be installed.
NOTE: For secure installation, the unit must be mounted
to at least one wall stud.
3

INSTALLING THE CABINET

□ For wall stud installation, insert #12 x 3 in. screws with
washers into the stud locations (not included).
□ For drywall installation, drill holes at the appropriate
locations and insert toggle bolts with washers (not included).
□ For concrete wall installation, drill 1/4 in. holes at the
appropriate locations and insert #12 wall anchors, followed
by #12 x 3 in. screws (not included).
4

INSTALLING THE VANITY TOP

IMPORTANT: Do not use plumber's putty.
NOTE: The faucet, drain, and supply lines are not included. Install these
parts to the vanity top according to the manufacturer's instructions.
□ Apply silicone caulk/sealant (not included) to all
four corners of the cabinet.
□ Place the vanity top onto the cabinet.
□ Position the top so that it has an equal amount of
overhang on each side and use a level to ensure
the vanity top surface is level.
□ Apply silicone onto the seam between the edge
of the vanity top and the wall, smooth the bead,
and allow to cure before use.
Phillips screwdriver
Power drill
Caulk/sealant
Model# PPSOFSVL24M
Use and Care Guide
Vanity Combo with Mirror
HARDWARE INCLUDED
AA - Knob x 2
CC - Hanging bracket x 2
Level
2
POSITIONING THE CABINET
□ Move the cabinet into place,
and use wood shims to level the
cabinet against the wall.
5

INSTALLING THE HARDWARE

□ Attach the knob (AA) to the cabinet
with the provided screw (BB).
Please contact 1-888-774-8062 for further assistance.
Item# 1000 050 591
1000 050 588
PPSOFTRF24M
BB - Knob screw x 2
DD - Screw x 4
BB
AA
HOMEDEPOT.COM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PPSOFSVL24M and is the answer not in the manual?

Questions and answers

Summary of Contents for Glacier bay PPSOFSVL24M

  • Page 1 Item# 1000 050 591 1000 050 588 Model# PPSOFSVL24M PPSOFTRF24M Use and Care Guide Vanity Combo with Mirror TOOLS REQUIRED HARDWARE INCLUDED Hammer Safety goggles Phillips screwdriver Power drill AA - Knob x 2 BB - Knob screw x 2...
  • Page 2 Installation (continued) INSTALLING THE HANGING BRACKETS INSTALLING THE HANGING WIRE NOTE: Before installing, make sure all parts are present. Compare NOTE: This step is optional, and the hanging parts with the Hardware Included list. If any part is missing or hardware is not included.
  • Page 3 Núm. de artículo 1000 050 591 1000 050 588 Núm. de modelo PPSOFSVL24M PPSOFTRF24M Guía de uso y cuidado Combo de tocador y espejo HERRAMIENTAS REQUERIDAS HERRAJE INCLUIDO Martillo Gafas de seguridad Destornillador Phillips Taladro AA - Perilla x 2...
  • Page 4 Instalación (continuado) INSTALACIÓN DE LOS SOPORTES COLGANTES INSTALACIÓN DEL CABLE COLGANTE NOTA: Antes de comenzar a instalar, asegúrese de que todas las NOTA: Este paso es opcional, y el herraje partes estén presentes. Compare las partes con la lista del Herraje colgante no está...

This manual is also suitable for:

Ppsoftrf24m1000 050 5911000 050 588

Table of Contents