Glacier bay PPSOFSVL18 Use And Care Manual

Glacier bay PPSOFSVL18 Use And Care Manual

Vanity combo

Advertisement

Available languages

Available languages

Quick Links

TOOLS REQUIRED

Hammer
Safety goggles
Measuring tape
Wall hardware

Installation

1

PREPARING FOR INSTALLATION

NOTE: Before installation, make sure all parts
are present. Compare parts with the Hardware
Included list. If any part is missing or damaged,
do not attempt to install the product.
□ Determine the desired mounting location,
and mark the wall where the unit will be
installed.
NOTE: For secure installation, the unit
must be mounted to at least one wall stud.
3

INSTALLING THE CABINET

□ For wall stud installation, insert #12 x 3 in. screws
with washers into the stud locations (not included).
□ For drywall installation, drill holes at the appropriate
locations and insert toggle bolts with washers (not included).
□ For concrete wall installation, drill 1/4 in. holes at the
appropriate locations and insert #12 wall anchors,
followed by #12 x 3 in. screws (not included).
4

INSTALLING THE VANITY TOP

IMPORTANT: Do not use plumber's putty.
NOTE: The faucet, drain, and supply lines are not included. Install these
parts to the vanity top according to the manufacturer's instructions.
□ Apply silicone caulk/sealant (not included) to all four corners of the cabinet.
□ Place the vanity top onto the cabinet.
□ Position the top so that it has an equal amount of overhang on each side
and use a level to ensure the vanity top surface is level.
□ Apply silicone onto the seam between the edge of the vanity top and the
wall, smooth the bead, and allow to cure before use.
5

INSTALLING THE HARDWARE

□ Attach the knob (AA) to the cabinet with the provided screw (BB).
Phillips screwdriver
Power drill
Caulk/sealant
Use and Care Guide

HARDWARE INCLUDED

AA - Knob x 1
Level
2

POSITIONING THE CABINET

□ Move the cabinet into place, and use wood
shims to level the cabinet against the wall.
Please contact 1-888-774-8062 for further assistance.
Item #1003 431 358
Item #1003 431 362
Model # PPSOFSVL18
Model # PPSOFWHT18
Vanity Combo
BB - Screw x 1
BB
AA
HOMEDEPOT.COM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PPSOFSVL18 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Glacier bay PPSOFSVL18

  • Page 1 Item #1003 431 358 Item #1003 431 362 Model # PPSOFSVL18 Model # PPSOFWHT18 Use and Care Guide Vanity Combo TOOLS REQUIRED HARDWARE INCLUDED Hammer Safety goggles Phillips screwdriver Power drill AA - Knob x 1 BB - Screw x 1...
  • Page 2 Troubleshooting Problem Possible Cause Solution The doors do not align or The hinges are misaligned. Hold the door while loosening Up — Down the space is too big or too screws. Align the doors properly, In — Out tight between the doors. and re-tighten the screws.
  • Page 3 Núm. de artículo 1003 431 358 Núm. de artículo 1003 431 362 Núm. de modelo PPSOFSVL18 Núm. de modelo PPSOFWHT18 Guía de uso y cuidado Combo de tocador HERRAMIENTAS REQUERIDAS HERRAJE INCLUIDO Martillo Gafas de seguridad Destornillador Phillips Taladro AA - Perilla x 1 BB - Tornillo x 1 Cinta métrica...
  • Page 4 Resolución de fallas Problema Posible causa Solución Arriba — Abajo Las puertas no se alinean Las bisagras están Sostenga la puerta mientras o el espacio es demasiado desalineadas. afloja los tornillos. Alinee las grande o está demasiado puertas adecuadamente y Izquierda —...

This manual is also suitable for:

Ppsofwht1810034313581003431362

Table of Contents