Table of Contents
Advertisement
en Cleaning aid
break them down. If the self-cleaning surfaces no
longer clean sufficiently during operation, heat up the
cooking compartment specifically.
ATTENTION!
If the self-cleaning surfaces are not cleaned regularly,
the surfaces may be damaged.
If dark spots can be seen on the self-cleaning sur-
▶
faces, heat up the cooking compartment.
Do no use any oven cleaners or abrasive cleaning
▶
aids. If oven cleaner accidentally comes into contact
with the self-cleaning surfaces, dab the surfaces im-
mediately with water and a sponge cloth. Do not rub
them.
Remove the accessories and cookware from the
1.
cooking compartment.
Detach the shelf supports and remove them from
2.
the cooking compartment.
→ "Rails", Page 15
Clean coarse dirt with hot soapy water and a soft
3.
cloth:
– From the smooth enamel surfaces
– From the inside of the appliance cover
– From the glass cover on the oven lamp
This prevents stubborn stains.
Remove any objects from the cooking compartment.
4.
The cooking compartment must be empty.
Use the function selector to set 3D hot air.
5.
11 Cleaning aid
The cleaning aid is a fast alternative for occasionally
cleaning the cooking compartment. The cleaning aid
evaporates soapy water and therefore softens dirt. This
means that dirt can be removed more easily.
11.1 Setting the cleaning aid
WARNING ‒ Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
Never pour water into the cooking compartment
▶
when the cooking compartment is hot.
Requirement: The cooking compartment must be
cooled down completely.
Remove the accessories from the cooking compart-
1.
ment.
Add one drop of detergent to 0.4 l water and pour it
2.
onto the centre of the cooking compartment floor.
Do not use distilled water.
Use the function selector to set the Bottom heat-
3.
type of heating.
ing
Use the temperature selector to set 80 °C.
4.
Press
repeatedly until
5.
play.
Use
or
to set the duration to four minutes.
6.
a After a few seconds, the appliance starts heating
and the duration counts down.
a When the cooking time has counted down, a signal
sounds and the duration is at zero in the display.
14
is selected in the dis-
Use the temperature selector to set the maximum
6.
temperature.
a The appliance starts heating after a few seconds.
Switch off the appliance after 1 hour.
7.
Once the appliance has cooled down sufficiently,
8.
wipe the cooking compartment with a damp cloth.
Note: Reddish marks may appear on the self-clean-
ing surfaces. This is not rust, but the residues of
salty food. Nutrients such as sugars and proteins
are not removed from the surface coating and may
stick to the surface. These spots are not harmful
and do not impair the cleaning ability of the self-
cleaning surfaces.
Attach the shelf supports.
9.
→ "Rails", Page 15
10.4 Cleaning the stainless steel surfaces
Observe the information regarding the cleaning
1.
agents.
Clean using a sponge cloth and hot soapy water in
2.
the direction of the finish.
Dry with a soft cloth.
3.
4.
Apply a thin layer of the stainless steel cleaning
product with a soft cloth.
Tip: You can obtain stainless steel cleaning products
from after-sales service or the online shop.
Switch off the appliance and leave it to cool for ap-
7.
prox. 20 minutes.
11.2 Cleaning the cooking compartment
after using it
ATTENTION!
If the cooking compartment remains damp for too long,
this results in corrosion.
After using the cleaning aid, wipe the cooking com-
▶
partment and allow it to dry completely.
Requirement: The cooking compartment has cooled
down.
Open the appliance door and absorb the residual
1.
water with an absorbent sponge cloth.
Clean smooth surfaces in the cooking compartment
2.
with a dish cloth or a soft brush. Remove stubborn
residues with a stainless steel spiral scourer.
Remove limescale deposits using a vinegar-soaked
3.
cloth. Wipe this away with clear water and use a soft
cloth to also rub underneath the door seal dry.
Once the cooking compartment is sufficiently clean:
4.
In order to cool the cooking compartment, leave
‒
the appliance door open in the detent position
for approx. one hour.
To dry the cooking compartment more quickly,
‒
heat up the appliance with the door open with 3D
and 50 °C for approx. five minutes.
hot air
Advertisement
Table of Contents
