RedMax GZ360 Operator's Manual page 36

Kickback and guide bar nose radius
For sprocket nose bars the nose radius is defined by the
number of teeth (for example 10T). For solid guide bars
Guide bar
Length, in/cm Pitch, in
14/36 3/8
16/41
Filing equipment and filing angles
Using RedMax file gauge will give you the correct filing
angles. We recommend you to always use a RedMax
file gauge to restore the sharpness of the saw chain.
The part numbers are given in the table below.
H37
36
Gauge, in/mm
0.050/1.3
4 mm 579 65 36-01
the nose radius is defined by the size of the nose radius.
For a given guide bar length, you may use a guide bar
with smaller nose radius than listed.
Saw chain
Max. nose ra- Type
dius
9T RedMax H37
If you are not sure of how to identify what saw chain you
have on your chainsaw, please visit your servicing
dealer for more information.
0,65 mm
Length, drive Low Kickback
links (no.)
52 Yes
56
30° 80°
1086 - 002 - 15.10.2019