KickAss KADCDC40A-AND User Manual page 12

CHOOSING THE BATTERY TYPE
The battery type setting must be confirmed during device installation. When the auxiliary
battery is connected, press and hold the Mode button for 2 ~ 4 seconds, upon releasing
the button, the battery type LED will move to the next position. Repeat the steps until
required battery type LED is selected. Battery type setting is now programed The
selected battery type will be saved as the new default.
CHARGING STAGE PROFILE
STAGE
BULK
ABSORPTION
FLOAT
NOTE:
When in FLOAT stage, the battery is fully charged. At float stage, when the battery voltage drops to
0.3V below the specified float voltage for the battery type connected, the charger will restart charging
form the BULK stage.
GEL AGM
100% 100%
Current Current
Until Until
14.1 V 14.7 V
Constant Constant
14.1 V 14.7 V
Until 2.6A Until 2.6A
13.5V 13.4V
at 100% at 100%
Current Current
Max Max
11
12V 20A
DESCRIPTION
WET CALCIUM
100%
Current
Until
14.4 V
Constant Constant
14.4 V
Until 2.6A Until 2.6A
13.4V
at 100% at 100%
Current
Max
LifePO4
100% 100%
Current Current
Until Until
15.3 V 14.5 V
Constant
15.3 V 14.5 V
Until 2.6A
13.6V 13.6V
at 100%
Current Current
Max Max