Table of Contents
Advertisement
WIRING SIZE
To make sound electrical connections, the battery cable should be the correct size and the correct
terminals should be crimped or soldered.
CABLE SIZING
The table below outlining the required cable size for a given install length.
Please refer to this table for Vehicle Input, Solar Input, Ground and Battery Output cable thickness
requirements. Always choose a wire cross sectional area equal to or greater than what is specified
below.
Part Number
meter(m)
KADCDC20A-AND
KADCDC40A-AND
Note:
•
Always use a fuse in-line for all connections to the starter and aux battery!
•
The input and output negative cables labeled Ground 3 and Ground 2 should be
connected at the battery negative poles for improved performance.
For more information or assistance, see installation videos at kickassproducts.com.au
Cable Install Length
feet(ft)
1 - 6.5
3 - 21
6.5 - 8
12 - 26
1 - 6.5
3 - 21
6.5 - 8
21 - 26
Recommended
Closest
Wire Cross
(BAE, B&S, AWG)
Section (mm²)
7.71
13.56
13.56
13.56
8
Recommend KickAss
Wiring Kit
8
KAPRDBWK8MMPP
6
KAHDDBWKPP80
6
KAHDDBWKPP65
6
KAHDDBWKPP80
Advertisement
Table of Contents
