Table of Contents
Advertisement
Safety
WARNING!
This combination of symbol and signal term indi-
cates potentially hazardous situations which may
cause death or serious injury if not averted.
ATTENTION!
This combination of symbol and signal term indi-
cates a potentially hazardous situation which may
cause minor or light injuries if it is not averted.
IMPORTANT!
This combination of symbol and signal term indi-
cates a potentially dangerous situation which may
cause material damage or harm the environment if it
is not averted.
NOTE!
This combination of symbol and signal term indicates
a potentially dangerous situation which may cause
material damage or harm the environment if it is not
averted.
Tips and recommendations
Tips and recommendations
This symbol highlights useful tips and recommenda-
tions as well as information for efficient and reliable
operation.
Observe the safety information in these operating in-
structions to minimise the risk of personal injury as well
as material damage and prevent hazardous situations.
2.2 Obligations of the operating company
Of the operator
The operating company is the person who operates the
roller driver for business or commercial reasons by her-
self, or leaves it to a third party for use or application,
and who bears the legal product responsibility for the
protection of the user, the staff or for third parties.
Obligations of the operating company
If the roller driver is used for commercial purposes, the
operating company of the roller driver must comply with
the legal working safety regulations. Therefore, the
safety notes in this operating manual, as well as the
safety, accident prevention and environment protection
regulations applying for the area of application of the
4
roller driver must be met. The following applies in par-
ticular:
- The operator must inform himself about the
applicable occupational health and safety regula-
tions and determine additional hazards in a
hazard assessment which are caused by the
special working conditions at the place of use of
the machine. These must be implemented in the
form of operating instructions for the operation of
the machine.
- During the entire period of use of the machine, the
operator must check whether the operating
instructions issued by him correspond to the cur-
rent state of the rules and regulations and, if
necessary, adapt them.
- The operator must clearly regulate and define the
responsibilities for installation, operation, troubles-
hooting, maintenance and cleaning.
- The operator must ensure that all persons hand-
ling the machine have read and understood these
instructions. In addition, he must train the person-
nel at regular intervals and inform them about the
dangers.
- The operator must provide the personnel with the
necessary protective equipment and instruct them
to wear the required protective equipment in a
binding manner.
Furthermore, the operator is responsible for ensuring
that the machine is always in perfect technical condi-
tion. The following therefore applies:
- The operator must ensure that the maintenance in-
tervals described in these instructions are obser-
ved.
- The operator must have all safety devices regu-
larly checked for operability and completeness.
2.3 Requirements to staff
The different tasks described in this manual represent
different requirements to the qualification of the persons
entrusted with these tasks.
WARNING!
Danger in case of insufficient qualification
of the staff!
Insufficiently qualified persons cannot estimate the
risks while using the roller driver and expose them-
selves and others to the danger of severe or lethal
injuries.
- Have all works only performed by qualified per-
sons.
- Keep insufficiently qualified persons out of the wor-
king area.
RFW-Series | Version 1.01
Advertisement
Table of Contents
