2. Install the following components:
a)
PSU
b)
Speakers
c)
I/O bracket
d)
Base cover
e)
System board shield
f)
Back cover
g)
Stand
3. Follow the procedure in
Input and Output board
Removing the Input and Output board
1. Follow the procedure in
2. Remove the following components:
a)
Stand
b)
Back cover
c)
System board shield
d)
Base cover
e)
I/O bracket
f)
Speakers
3. To remove the Input and Output board (I/O) board shield:
a) Disconnect the I/O board cable, I/O board power cable, and headset port cable from the system board [1].
NOTE:
Use the pull tab to disconnect the I/O board cable from the system board.
b) Remove the I/O board cable, I/O-board power cable, and headset port cable from the routing guides on the display assembly base
[2].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
75