Restore Default Button Action; About Status Bar Icons - Honeywell ScanPal EDA52 User Manual

Restore Default Button Action

To restore the button default action:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the clean icon
4. Choose the remapped button(s) you want restored to the default setting.
5. Tap Delete.

About Status Bar Icons

Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Icon
26
> Honeywell Settings > Keyremap.
• Tap the check box next to the button.
OR
• Tap All Select to choose all the buttons.
Description
Pending alarm and Alarm is set.
New text message or multimedia
message.
Error with text or multimedia message
delivery.
New email
Computer is connected to a PC with a
USB cable.
Synchronizing data.
Error with sync or sign-in.
Computer is connected with Ethernet.
.
Icon Description
Vibrate mode is turned On.
Airplane mode is turned On.
Bluetooth is turned On.
SD card is full.
Wi-Fi network connected with full signal
strength.
Wi-Fi network connected but no signal
strength.
Phone connected with full amount of
bars.
Phone connected with full amount of
bars but no Internet connection.
EDA52 User Guide