Chapter 2 Getting Started - Newland NLS-PT30 User Manual

Introduction
This chapter lists the parts and accessories for the PT-30 Series and explains how to install and charge the batteries, and
power on the PT-30 Series for the first time.
Unpacking
Carefully remove all protective material from the pack.
Verify that you received the following:
PT30 Portable (Barcode) Data Collector
USB cable
AC adaptor
Li-Polymer battery
Tethered stylus
Hand strap
Quick Start Guide
Getting Started
Installing the Main Battery
1. Figure 1 indicates the direction to unlock the latch.
2. Figure 2 indicates the direction to take out the battery cover.
3. Follow the instructions of figure 3 and 4 to insert the battery.
4. Follow the instructions of figure 5 to close down the battery cover.
5. Push the latch to the lock position.

Chapter 2 Getting Started

4