Chapter 5 Accessories - Newland NLS-PT30 User Manual

Battery
Terminal battery capacity too low will cause the terminal malfunction. Please charge the battery at less than 8 hours for
sure the main battery and backup battery capacity was in full charge states.
Charging
Use AC adaptor charging
LED charging indicator
Red light long bright
Green light long bright
LED indicator for Scanning/Decoding/Communication
Red light bright
Green light bright
Blue light flash
Connect Host PC via USB cable
1. Open the USB port cover which is located in bottom of PT30.
2. Plug in USB cable connector to PT30 USB port and the other sides of cable connect to host PC.
27

Chapter 5 Accessories

: During charge.
: Charge complete.
: During scan barcode.
: Success decoded barcode.
: Communication module (BT/WIFI/GPRS/3G)during communication.