Chapter 4 Using Wifi Communication - Newland NLS-PT30 User Manual

A. Main Window
The Main window provides an overview of the current wireless network connection configuration (Active Profile)
The following image (in Figure 5.1) is the SCU Main windows for Windows CE.
Enable Radio/Disable Radio
When the radio is enabled, select this button (which displays Disable Radio) to disable it. When the radio is disabled, select the
same button (which now displays Enable Radio) to enable it. When disabled, the radio does not attempt to make a connection to an
access point.
Active Profile
To displays the name of the active profile. Use the drop‐down menu to select a different profile.
Note: If ThirdPartyConfig is selected (and after the device goes through a power cycle), WZC (Windows Zero Configuration) or
another application is used to configure the SSID, Auth Type, EAP Type, and Encryption settings.
Status
To indicates the current status of the Summit radio. Connection statuses include:
Down
Disabled
Not Associated
Associated

Chapter 4 Using WiFi Communication

Figure 5.1: SCU Main Window
‐ The radio is not recognized by Summit software and therefore is not associated and nor
authenticated.
‐ The radio is disabled. To enable the radio, tap Enable Radio located on the SCU Main window. When
the radio is disabled, it does not attempt to make a connection to an access point.
‐ The radio has not established a connection to an access point.
‐ The radio has established a connection to an access point.
22