Advertisement
Introduction
This chapter lists the parts and accessories for the MT70 Series and explains how to install and charge the batteries, and
power on the MT70 Series for the first time.
Unpacking
Carefully remove all protective material from the pack.
Verify that you received the following:
MT70 Portable (Barcode) Data Collector
USB cable
AC adaptor
Li-Polymer battery
Tethered stylus
Hand strap
Quick Start Guide
Getting Started
Installing the Main Battery
1
4
1. Figure 1 indicates the direction to unlock thelatch.
2. Figure 2 indicates the direction to take out the battery cover.
3. Follow the instructions of figure 3 and 4 to insert the battery.
4. Follow the instructions of figure 5 to close down the battery cover.
5. Push the latch to the lock position.
Chapter 2 Getting Started
2
5
3
6
4
Advertisement
