Advertisement
Battery
Terminal battery capacity too low will cause the terminal malfunction. Please charge the battery at less than 8 hours for
sure the main battery and backup battery capacity was in full charge states.
Charging
Use AC adaptor charging
LED charging indicator
Red light long bright
Green light long bright
LED indicator for Scanning/Decoding/Communication
Red light bright
Green light bright
Blue light flash
Connect Host PC via USB cable
1.
Open the USB port cover which is located in bottom of MT70.
2.
Plug in USB cable connector to MT70 USB port and the other sides of cable connect to host PC.
Notice: Please make sure the host PC already installed Microsoft ActiveSync before connection.
Chapter 5 Accessories
: During charge.
: Charge complete.
: During scan barcode.
: Success decoded barcode.
: Communication module (WIF)during communication.
26
Advertisement
