Page 3
When releasing the side clips of the D-cover you can use the SRT 6 There are two snaps on each side of the metal Take away the Display Assembly (UI module) frame. and avoid touching the pads. Issue 1 11/02 ãNokia Corporation. Page 3...
Page 4
The hole of the rately. To remove it from connector housing , Microphone has to point to the hole of the you have to push it with for example Torx connector housing. Driver Page 4 ãNokia Corporation. Issue 1 11/02...
Page 5
19. Remove the SIM card support this way. 20. The Release Spring is locked on two sides. Use a screwdriver to unlock the two snaps 21. After releasing the two hooks, you can remove the Release Springs easily. Issue 1 11/02 ãNokia Corporation. Page 5...
Page 6
Disassembly Instructions CCS Technical Documentation Remove Shielding Lids Table 3: 23. When working with PWB, always use repair Jig. 22. Remove Shielding Lids. Do not re- use shielding lid once it is removed. Page 6 ãNokia Corporation. Issue 1 11/02...
Page 7
Company confidential RH-9 CCS Technical Documentation Disassembly Instructions Reassembly procedure Reassembly takes place in reversed order compared with disassembly. Issue 1 11/02 ãNokia Corporation. Page 7...