Nokia RH-47 Series Disassembly & Assembly Instructions
Hide thumbs
Also See for RH-47 Series:
- Description (64 pages) ,
- Rf description and troubleshooting (76 pages)
Related Manuals for Nokia RH-47 Series
Summary of Contents for Nokia RH-47 Series
- Page 1 Nokia Customer Care RH-47 Series Cellular Phones 5 - Disassembly & Assembly Instructions Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 1 Company Confidential...
- Page 2 RH-47 Company Confidential 5 - Disassembly Instructions Nokia Customer Care [This page intentionally blank] Page 2 Copyright© 2004 Nokia Corporation Issue 1 05/04 Company Confidential...
-
Page 3: Table Of Contents
5 - Disassembly Instructions Table of Contents Page No Disassembly ............................... 4 Required tools ............................5 Disassembly instructions ........................5 Assembly ..............................13 Required tools .............................13 Assembly instructions ........................14 Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 3 Company Confidential... - Page 4 RH-47 Company Confidential 5 - Disassembly Instructions Nokia Customer Care [This page intentionally blank] Page 4 Copyright© 2004 Nokia Corporation Issue 1 05/04 Company Confidential...
-
Page 5: Disassembly
• SRT-6 opening tool • Tweezer (ESD compliant) • Torx T6 screwdriver (ESD compliant) • Gloves • SS-33 A-cover opening tool (recommended) Figure 1: Required tools for disassembly Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 5 Company Confidential... - Page 6 2. To remove the SIM card, slide (1) the SIM card holder downwards. Then rotate the holder (2) to open the SIM- connector latch and remove the SIM card. 3. To remove the MMC card, open (1) the MMC lid in grip and remove (2) the card. Copyright © 2004 Nokia Corporation Page 6 Issue 1 05/04...
- Page 7 6. To remove the LCD module, carefully lift (it is not locked to keyguide) it from the upper edge. Tilt the LCD mod- ule 180 degrees. Support the LCD module to avoid damaging the module, connectors or flex because LCD con- nector is still connected. Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 7...
- Page 8 Nokia Customer Care 7. Use a special opening tool SRT-6 to unplug the LCD connector. 8. To remove the keyguide assembly, simply lift it (it is not locked). Copyright © 2004 Nokia Corporation Page 8 Issue 1 05/04 Company Confidential...
- Page 9 10. To remove the earpiece from keyguide push the component on top side of the keyguide. 11. To remove UI PWB from the center frame assembly, pull them apart. Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 9...
- Page 10 12. To remove the engine PWB, simply lift it out from the B-cover. 13.Use tweezers or fingers to remove the antenna assembly. 14.Use tweezers to remove the power switch actuator. 15. Use fingers or tweezers to remove the DC-jack. Copyright © 2004 Nokia Corporation Page 10 Issue 1 05/04 Company Confidential...
- Page 11 Nokia Customer Care 5 - Disassembly Instructions 16. Use fingers or tweezers to remove the line-ins. 17. Use tweezers to remove the vibra. 18. Use fingers to remove the IHF-lid. Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 11 Company Confidential...
- Page 12 Be careful because there are thin wires on the speaker that can be easily damaged. Note for Reassembly. The HF/Malt speaker is fixed with a double-sided adhesive. Use a new adhesive when reas- sembling. Copyright © 2004 Nokia Corporation Page 12 Issue 1 05/04...
-
Page 13: Assembly
• SRT-6 opening tool • Tweezer (ESD compliant) • Dynamometric Torx T6 screwdriver (ESD compliant), 28-30 Ncm • Torx T6 screwdriver • Gloves Figure 2: Required tools for assembly Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 13 Company Confidential... -
Page 14: Assembly Instructions
There is a nose in the speaker and a recess in the B-cover. The nose should go into the recess. 2. Use tweezers or fingers to reassemble the IHF-lid assembly. 3. Use tweezers to reassemble the vibra, avoid damaging the connectors. Copyright © 2004 Nokia Corporation Page 14 Issue 1 05/04... - Page 15 7. Use first tweezers to assemble the antenna-assembly to the B-cover assembly. Then press the antenna-assem- bly down to fix the two snaps. Be careful not to damage antenna contact springs. Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 15...
- Page 16 PWB is lying flat on the B-cover assembly. 9. Use tweezers to reassemble the earpiece. Be careful not to bend the connectors or damage the wirings. Copyright © 2004 Nokia Corporation Page 16 Issue 1 05/04...
- Page 17 11. Hold the keyguide upside down and place the UI PWB and center frame assembly on the keyguide. Locate bottom edge snaps. Then press so that the upper edge snaps lock. Never touch the metal springs of the center frame with fingers or tools. Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 17...
- Page 18 14. Place the LCD shield carefully on the LCD module. Check LCD shield orientation. Be careful not to damage the display frame and check that it fits completely without any mechanical stress. Copyright © 2004 Nokia Corporation Page 18 Issue 1 05/04...
- Page 19 16. To reassemble the grip, place it on the A-cover. 17. Place the keypad on the engine assembly. To fit the A-cover to the engine assembly, press directly downwards. Note! Make sure that all snaps locked correctly. Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 19 Company Confidential...
- Page 20 19. To reassemble the MMC card, open the lid in grip and place the card into the slot located in the B-cover. 20. Reassemble the battery Copyright © 2004 Nokia Corporation Page 20 Issue 1 05/04...
- Page 21 Company Confidential RH-47 Nokia Customer Care 5 - Disassembly Instructions 21. Slide the battery cover in place. Copyright © 2004 Nokia Corporation Issue 1 05/04 Page 21 Company Confidential...
- Page 22 RH-47 Company Confidential 5 - Disassembly Instructions Nokia Customer Care [This page intentionally blank] Copyright © 2004 Nokia Corporation Page 22 Issue 1 05/04 Company Confidential...