Connecting The Power Cord - Samsung WAM3501 User Manual

Connecting the Power Cord

❚
<WAM5500, WAM3500, WAM3501>
Connect the power cord of your speaker as shown. It will connect at an angle.
1
Push the power cord into the notch at the edge of the speaker bottom.
2
This lets the speaker rest flat when you stand it up.
ADD SPK/Wi-Fi SETUP SERVICE1
SPK ADD/Wi-Fi SETUP SERVICE1 SERVICE2 POWER
< WAM5500/WAM3500 >
<WAM1500, WAM1501>
Connect the adaptor's input power cord to the adaptor. (WAM1500 Only)
1
Connect the adaptor's output power cord to the DC 19V jack on the speaker.
2
Push the power cord into the notch at the edge of the speaker bottom.
3
This lets the speaker rest flat when you stand it up.
NOTE
9 Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that
it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.
SERVICE2 POWER
SPK ADD/Wi-Fi SETUP SERVICE DC 19V
< WAM1500 >
SPK ADD/Wi-Fi SETUP SERVICE
SPK ADD/Wi-Fi SETUP SERVICE POWER
< WAM3501 >
4444 11
POWER
SPK ADD/Wi-Fi SETUP SERVICE DC 19V
< WAM1501 >