Connecting The Power Cord - Samsung Wireless Audio Radiant 360 R5 User Manual

Connecting the Power Cord

❚
<WAM5500, WAM3500 Only>
Connect the power cord of your speaker
1
as shown. It will connect at an angle.
Push the power cord into the notch at the
2
edge of the speaker bottom. This lets the
speaker rest flat when you stand it up.
<WAM1500 Only>
Connect the adaptor's input power
1
cord to the adaptor.
Connect the adaptor's output power
2
cord (with the round plug) to the DC
19V jack on the speaker.
Push the power cord into the notch at
3
the edge of the speaker bottom. This
lets the speaker rest flat when you
stand it up.
NOTE
9 Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that
it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.
ADD SPK/Wi-Fi SETUP SERVICE1
SPK ADD/Wi-Fi SETUP SERVICE1 SERVICE2 POWER
4444 12
SERVICE2 POWER
SPK ADD/Wi-Fi SETUP SERVICE DC 19V