Connecting The Power Cord; Installing On A Wall - Samsung WAM1400 User Manual

Connecting the Power Cord

❚
Connect the adaptor's input power cord to the
1
adaptor.
Connect the adaptor's output power cord to the
2
DC 19V jack on the speaker.
Push the power cord into the notch at the edge of
3
the speaker bottom.
This lets the speaker rest flat when you stand it
up.
NOTE
9 Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that
it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.

Installing on a wall

A
You can purchase a wall mount separately to install the speaker on a wall if you want.
Considerations for purchasing
`
- Endurable load : Above 5.6 Kg
- Hole size : 1/4 - 20 threaded insert
NOTES
9 Since Wall-mount installation is optional, you must purchase the corresponding accessories separately.
9 Please have a qualified installer install the Wall Mount Bracket.
9 Ask a professional installation company to mount your product on the wall.
9 Check the strength of the wall before you install the Wall Mount Bracket. If the strength is
insufficient,make sure to reinforce the wall before installing the Wall Mount Bracket and the speaker on
the wall.
9 For more information, please refer to the Wall Mount's manual.
9 Samsung Electronics is not liable for any damage to the product due to the product being installed
inappropriately.
9 Please beware not to install the speaker being laid down or turned upside down.
4444 11
SPK ADD/Wi-Fi SETUP SERVICE DC 19V