Advertisement
4.
Select drawer face & insert cam bolts at all hole locations.
5.
Select drawer back & insert cam nut into hole location with arrow facing
bolt hole.
6.
Repeat for all hole locations.
7.
Select drawer back & side (right or left).
8.
Align the bottom grooves on drawer parts.
9.
Insert cam bolts into holes on side of drawer back.
10. Secure by turning cam nuts in clockwise direction until snug.
11. Repeat for remaining drawer side.
12. Insert drawer bottom into sides making sure bottom is within the grooves.
13. Insert cam nuts into sides with the arrow facing the bolt hole.
14. Insert drawer face cam bolts into drawer sides at hole locations.
2
15. Secure by turning cam nuts in clockwise direction until snug.
16. Attach drawer handle to drawer face using 1 1/2 in. machine screws.
STEP 2 - Attaching Drawer Glides
1.
Expand drawer glide to full extension.
2.
Move lever & pull out glide to seperate.
3.
Position drawer to determine slide placement. Slide position is determined
by which score mark aligns with tower groove.
4.
Place slide at the determined score mark. The open end should face the
drawer back.
5.
Center the screw holes with the score mark.
6.
Secure the slide with 1/2 in. screws at the vertical oval locations.
7.
Repeat for the 2nd slide.
Advertisement
