Philips Curved Business Monitor 6000 Series User Manual page 4

Table of Contents

Advertisement

degrees. If the -5 degree downward
tilt angle maximum is exceeded, the
monitor damage will not be covered
under warranty.
Do not knock or drop the monitor
during operation or transportation.
The USB Type-C port could only be
connected to specify equipment
with fire enclosure in compliance
with IEC 62368-1 or IEC 60950-1.
Excessive usage of monitor can cause
eye discomfort, it's better to take
shorter breaks more often at your
workstation than longer breaks
and less often; for example a 5-10
minute break after 50-60-minute
continuous screen use is likely to
be better than a 15-minute break
every two hours. Try to keep your
eyes from eye strain while using the
screen for a constant period of time
by :
Looking at something varying
distances after a long period
focusing on the screen.
Conscious Blinking often while
you work.
Gently closing and rolling your
eyes to relax.
Reposition your screen to appro-
priate height and angle accord-
ing to your height.
Adjusting the brightness and
contrast to appropriate level.
Adjusting the environment light-
ing similar to that of your screen
brightness, avoid the fluorescent
lighting, and surfaces that don't
reflect too much light.
Seeing a doctor if your symp-
toms.
Maintenance
To protect your monitor from possible
damage, do not put excessive
pressure on the LCD panel. When
moving your monitor, grasp the
frame to lift; do not lift the monitor
by placing your hand or fingers on
the LCD panel.
Oil-based cleaning solutions may
damage the plastic parts and void the
warranty.
Unplug the monitor if you are not
going to use it for an extensive period
of time.
Unplug the monitor if you need to
clean it with a slightly damp cloth.
The screen may be wiped with a dry
cloth when the power is off. However,
never use organic solvent, such as,
alcohol, or ammonia-based liquids to
clean your monitor.
To avoid the risk of shock or
permanent damage to the set, do
not expose the monitor to dust,
rain, water, or excessive moisture
environment.
If your monitor gets wet, wipe it with
dry cloth as soon as possible.
If foreign substance or water gets in
your monitor, please turn the power
off immediately and disconnect the
power cord. Then, remove the foreign
substance or water, and send it to the
maintenance center.
Do not store or use the monitor in
locations exposed to heat, direct
sunlight or extreme cold.
In order to maintain the best
performance of your monitor and
use it for a longer lifetime, please use
the monitor in a location that falls
within the following temperature and
humidity ranges.
2

Advertisement

Table of Contents
loading

Table of Contents