Philips Curved Business Monitor 6000 Series User Manual page 21

45B1U6900CH
What is it?
1
With the Multiclient Integrated Keyboard Video Mouse (KVM) switch feature, it is
possible to control two separate PCs with a one monitor/keyboard/mouse setup.
How to Enable Multiclient Integrated KVM
2
With the built-in Multiclient Integrated KVM feature, it's easy to switch between each
connected device via the On-Screen Display (OSD) menu setting. For the use of USB-C,
HDMI and/or DP as input, use the USB-C cable in the direction of USB Upstream.
Then, connect the upstream cables from your PC to the USB-C1 and USB-C2 ports
located on the monitor. This process for each PC can be done simultaneously. Please
refer to the table and graphic below for more information.
This table explains each source to its corresponding ports on the monitor.
Source
HDMI or DP
USBC1
A Step-by-Step procedure:
1. Connect each cord from the corresponding ports on the monitor, as mentioned in
the table above, downstream to each PC.
1
OR OR
USB A-C Cable
OR
PC1
2
2. Enter the On-Screen Display (OSD) menu. Go to the KVM tab and select "Auto",
"USB C1", or "USB C2" to switch the monitor view from one device to another. To
switch to another monitor view, simply repeat this step.
  
   


 
 

USB Upstream
USB C2
USB C1
OR
1
USB C-C Cable
PC2

 
 
Source
HDMI or DP
USBC2
19
USB Upstream
USB C1
USB C2