Trouble Shooting - Hyundai LS5T-52 Owner's Manual

TROUBLE SHOOTING

PROBLEM
Fails to split logs
The log pusher
moves jerkily,
taking unfamiliar
noise or vibrating
a lot
Oil leaks around
cylinder ram or
from other points.
65563UK00M100.indd 13
PROBABLE CAUSE
Log is improperly positioned
The sizes or hardness of the log.
e x c e e d s t h e c a p a c i t y o f t h e
machine
Wedge cutting edge is blunt
Oil leaks
Unauthorized adjustment was
made on Max. Pressure Limiting
Screw. Lower max pressure rating
was set.
Lack of hydraulic oil and excessive
air in the hydraulic system.
Air sealed in hydraulic system
while operating.
Bleed Screw is not tightened
before moving the log splitter.
Oil Drain Bolt with Dipstick is
not tight.
Hydraulic Control Valve Assembly
and / or seal(s) worn
13
REMEDY SUGGESTED
R e f e r t o " L o g S p l i t t e r
Operation"section for perfect log
loading.
R e d u c e t h e l o g s i z e s b e f o r e
splitting it on the log splitter.
R e f e r t o " S h a r p e n i n g W e d g e
"section to sharpen the cutting
edge.
Locate leak(s) and contact the
dealer
Contact the dealer.
Check oil level for possible oil
refilling.
Contact the dealer.
Loosen Bleed Screw by 3 ~ 4
rotations before operating the log
splitter.
Tighten the Bleed Screw up before
moving the log splitter.
Tighten the Oil Drain Bolt with
Dipstick.
Contact the dealer
2019/8/30 11:38:43