Advertisement
IMPORTANT SAfETY INSTRUCTIONS
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
• Keep proper footing and balance at all times. This enables better control of the power tool
in unexpected situations.
• Dress appropriately, do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
POWER TOOL USE AND CARE
• Use the correct power tool for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
• Do not use the power tool if the on and off switch is malfunctioning. Any power tool that
cannot be controlled with the on and off switch is dangerous and must be repaired.
• Disconnect the power tool from the power source before storing the product or making
any adjustments. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children. Do not allow anyone to operate the
power tool unless they have read the instruction manual. Power tools are dangerous in
the hands of untrained users.
• Check and maintain your power tool before and after every use. Look for binding of
moving parts, misalignment, damage, or any other conditions that may affect the
power tool's operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
• Clean and sharpen all cutting tools before and after use. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to control.
• Do not use power tools or accessories for any purpose outside it's intended use. Use
of the power tool for operations different from those intended could result in a hazardous
situation.
BATTERy TOOL USE AND CARE
• Recharge only with the charger specified by the manufacturer. Use of a charger that is
not designed for the battery pack may create a risk of fire.
• Keep the charging inlet away from other metal objects such as paper clips, coins,
keys, nails, screws or other small metal objects. These objects may cause the battery
terminal to short which could result in burns or fires.
HEDGE TRImmER SAFETy WARNINGS:
• Keep all body parts away from the cutting blade while the power tool is plugged into the power
source. Make sure the power tool is unplugged from the power source when clearing jammed
material from the blade. A moment of inattention while operating the hedge trimmer may result
in serious personal injury.
4
Advertisement
