Table of Contents
Advertisement
When selecting "NEW"
The current settings are registered as a new signal and are
saved to an unassigned line starting at memory location
No.51.
A registered name is automatically given.
The "NEW ENTRY?" menu will be displayed.
Use the CURSOR
or
"NO" and press ENTER.
Items to select
• YES ------------- Registers settings as a new signal and
saves the signal in an unassigned
location starting at memory location
No.51.
• NO -------------- Does not register settings.
A registered name is given as follows:
VIDEO/S-VIDEO ----- Video standard with a list number
e.g. NTSC51 or PAL52.
RGB --------------------- "RGB" with a list number e.g.
RGB60.
NOTE:
• If the Input list does not have any unassigned memory
location starting at No. 51 then, the "NEW" item will be
selectable. For signal registration see "SIGNAL ENTRY" in
the Set-Up manual.
• The Automatic Save Feature is available only for signals
listed in the INPUT LIST.
button to highlight "YES" or
NEW ENTRY?
LIST No.
NAME
YES
21
BASIC OPERATION
**
********
NO
Advertisement
Table of Contents
