LG ProCentric 55UV560H Commercial Mode Setup Manual page 8

Commercial Mode Overview (Cont.)
FTG Mode Features
This mode provides the following features:
• Logical or physical channel tuning of physical RF channels and Aux inputs.
• Mapping of RF channels with minor (program) numbers up to 999.
• FTG Channel Map of up to 600 channels.
• Start Channel set for RF or Aux input delivered content.
• Pro:Centric data delivery over RF or IP.
• TV Zoning (including channel restrictions by Zone) option for location-specific configurations.
LG's Cloud Configuration Tool enables you to create an FTG Configuration (.tlx) file, which may be used to
configure the CPU for FTG Mode. Configuration utilities enable you to create/edit an FTG Channel Map and
configure Installer Menu settings. You can also create a Clone (.tlx) file from a Master TV Setup that may
be used to configure the CPU for FTG Mode.
Note: The TV Zoning feature is supported via ".tlx" file. See Reference section, "Using the TV Zoning
Feature," for further information.
In this mode, the CPU is the owner of the FTG Channel Map and must be configured with an FTG Channel
Map and FTG Installer Menu settings using one of the following processes:
• Local: Configure an individual UV560H/UV562H TV via its USB port using a USB memory device /
".tlx" file. The file may be either a Clone file (see "Cloning Procedures" on pages 43 to 48) or an FTG
Configuration file (see "Cloud Configuration Tool Overview" on pages 49 to 54).
• Remote: Configure all UV560H/UV562H TVs at the site using a Pro:Centric server head end device
(Example: PCS200S). Refer to the Pro:Centric Server Admin Client User Guide for further information.
While the TV is in FTG Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu
items will be read-only.
• Any FTG Mode configuration changes must be made using a ".tlx" file (typically edited in the Cloud
Configuration Tool), Channel Map and Installer Menu configuration utilities enable you to make changes,
respectively, to the FTG Channel Map and FTG Installer Menu settings as necessary. See information
on local configuration in this document or refer to documentation for the server for information on remote
management.
• If it becomes necessary to restore the TV to Pass-through Mode, there are several options that will enable
you to do so. See Reference section, "Restoring Factory Defaults on the TV(s)," for further information.
Pages 49 to 54 provide overviews of the utilities that comprise the Cloud Configuration Tool. Refer
to the Cloud Configuration Tool User Guide for further information on the Cloud Configuration Tool.
Remote Management in FTG Mode
When the TV is configured for FTG Mode, remote management of the FTG Channel Map and FTG
Installer Menu settings is provided by a Pro:Centric server, via a Clone/Configuration (.tlx) file loaded
on the Pro:Centric Admin Client. Refer to the Pro:Centric Server Admin Client User Guide for further
information.
8
206-4326