LG ProCentric 55UV560H Commercial Mode Setup Manual page 59

(Continued from previous page)
• Select/highlight the Update Event field and press OK on the Installer Remote. Then, use
the Up/Down arrow keys to select either Enable or Disable from the drop-down list of options.
When Update Event is set to "Enable," an Update Time field is displayed on the screen.
• If Update Event is enabled, set the Update Time as required. Use the arrow keys on the
Installer Remote to select/highlight the Update Time field, and then press OK. Hour, Minute,
and Meridiem fields will be displayed. Select each field in turn and specify the appropriate
Wake For Update time, as desired. Note that the Update Time set in this menu is based on a
12-hour clock. Ensure the meridiem (AM/PM) specification is set accordingly.
6. Once all fields are completed as required, use the arrow keys on the Installer Remote to return
to the IP Environment Menu, as necessary, or press
206-4326
IP Environment Setup (Cont.)
to exit the IP Environment Menu.
59