Download
Share
Print this page
LG 49UV560H Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. LED TV
  5. 49UV560H
  6. Owner's manual

LG 49UV560H Owner's Manual

Hide thumbs Also See for 49UV560H:

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
Safety and Reference
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.
Please read this manual carefully before operating
your TV and retain it for future reference.
43UV560H
43UV570H
*MFL69885542*
49UV560H
49UV570H
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
55UV560H
55UV570H
P/NO : MFL69885542 (1711-REV01)
65UV560H
65UV570H
www.lg.com
Printed in Korea

Advertisement

loading

Related Manuals for LG 49UV560H

Summary of Contents for LG 49UV560H

  • Page 1 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 43UV560H 49UV560H 55UV560H 65UV560H 43UV570H 49UV570H 55UV570H 65UV570H www.lg.com...
  • Page 2 Warning! Important Safety the manufacturer. • Use only with the cart, stand, tripod, bracket, or instructions table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to Read these instructions. Keep these instructions. avoid injury from tip-over.
  • Page 3 This may damage the product and cause it to fall. • Use only an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product deformation.
  • Page 4 • When mounting a TV on the wall, make sure not • Product specifications or contents of this manual to install the TV by hanging the power and signal may be changed without prior notice due to cables on the back of the TV. upgrade of product functions.
  • Page 5 Lifting and Moving the TV Using the Button When moving or lifting the TV, read the following You can operate the TV functions, using the to prevent the TV from being scratched or button. damaged and for safe transportation regardless of its type and size.
  • Page 6 Mounting on a Table Attaching the TV to a desk (optional) (Depending upon model) (Depending upon model) If mounting the TV on a table, make sure it is installed according to the method outlined in 1 Lift and tilt the TV into its upright position on a ‘Attaching the TV to a desk’...
  • Page 7 Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket,...
  • Page 8 rate to another rate or adjust the brightness and contrast on the Picture menu until the picture is clear. Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. • Some USB Hubs may not work. If a USB device •...
  • Page 9 • Do not connect your headphones or earphones to the port for connecting an external speaker. (Power) Turns the TV on or off. Not functional. Remote Control Selects the remote’s operating mode: TV. Selects the remote’s operating mode: DVD. (Some buttons and services may not be provided Changes the input source.
  • Page 10 Settings To select Picture Mode Picture Picture Mode Settings Picture Mode Select the picture mode optimized for the viewing environment or the program. • Vivid Heightens contrast, brightness, and sharpness to display vivid images. • Standard Displays images in standard levels of contrast, brightness and sharpness.
  • Page 11 Settings • Picture Options Supported licenses may differ by model. For more Adjusts detailed setting for images. information about licenses, visit www.lg.com. • Noise Reduction Eliminates noise in the picture. • MPEG Noise Reduction Eliminates noise generated while creating digital picture signals.
  • Page 12 • Cannot control the TV with the remote control. LG Electronics will also provide open source code - Check if anything such as tape has been placed to you on CD-ROM for a charge covering the cost over the receiver.
  • Page 13 HDMI (PC) supported mode - Electrical circuit humming/panel buzzing A low level noise is generated from a high- Horizontal Vertical Resolution speed switching circuit, which supplies a Frequency (kHz) Frequency (Hz) large amount of current to operate a product. 640 x 350 31.46 70.09 It varies depending upon the product.
  • Page 14 Supported Video Formats 53.95 23.98 54.00 24.00 Extension Codec 56.25 25.00 VC-1 Advanced Profile 61.43 29.97 Video (except for WMVA), VC-1 4096 x 2160p 67.50 30.00 Simple and Main Profiles .asf, .wmv 112.50 50.00 WMA Standard (except for Audio WMA v1/ WMA Speech) 134.86 59.94 Xvid (except for 3 warp-point...
  • Page 15 Regulatory FCC RF Radiation Exposure Statement [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation FCC NOTICE exposure limits set forth for an uncontrolled environment. This transmitter must not be (For USA) colocated or operating in conjunction with any other antenna or transmitter.
  • Page 16 WARNING! (For Canada) [For product having the wireless function using 5 Never place a television set in an unstable GHz frequency bands] location. A television set may fall, causing serious • The device for operation in the band 5150–5250 personal injury or death. Many injuries, particularly MHz is only for indoor use to reduce the to children, can be avoided by taking simple potential for harmful interference to co-channel...
  • Page 17 Key CODES This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button...
  • Page 18 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is RS-232C IN not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 19 Set ID For Set ID number, see “Real Data Mapping”. 1 Press to access the main menus. 2 Press the Navigation buttons to scroll to General Set ID and press 3 Press the Navigation buttons to scroll to SET ID and press 4 Scroll left or right to select a set ID number and select (back), , .
  • Page 20 Communication Parameters Baud rate : 9600 bps (UART) Stop bit : 1 bit Data length : 8 bits Communication code : ASCII code Parity : None Use a crossed (reverse) cable. Command reference list (Depending upon model) DATA DATA COMMAND1 COMMAND2 COMMAND1 COMMAND2 (Hexadecimal) (Hexadecimal)
  • Page 21 Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV. (j, k, m or x) [Command 2] Second command to control the TV. [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 22 • Commands may work differently depending • Full wide mode may work differently based on upon model and signal. model and is supported for DTV fully, and ATV, AV partially. 01. Power (Command: k a) • To control Power *On or Off of the set. 03.
  • Page 23 06. Contrast (Command: k g) 11. OSD Select (Command: k l) • To adjust screen contrast. You can also adjust • To select OSD (On Screen Display) on/off when contrast in the Picture menu. controlling remotely. Transmission Transmission [k][g][ ][Set ID][ ][Data][Cr] [k][l][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Data 00 : OSD off...
  • Page 24 15. Equalizer (Command : j v) 17. Control Backlight, Control Panel Light (Command: m g) • Adjust EQ of the set. * For LCD TV / LED TV Transmission • To control the backlight. [j][v][ ][Set ID][ ][Data][Cr] Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [g][ ][Set ID][ ][OK/NG][Data][x] Frequency...
  • Page 25 19. 3D (Command: x t) (only 3D models) 20. Extended 3D(Command: x v) (only 3D models) (Depending upon model) (Depending upon model) • To change 3D mode for TV. • To change 3D option for TV. Transmission Transmission [x][t][ ][Set ID][ ][Data 00][ ] [x][v][ ][Set ID][ ][Data 00][ ] [Data 01] [ ][Data 02][ ][Data 03][Cr] [Data 01][Cr]...
  • Page 26 If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG does not guarantee IR working function. To make sure of this matter, here are two methods as below.
  • Page 27 CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
  • Page 28 LG Customer Information Center Declaration of Conformity For inquires or comments, visit www.lg.com or call; Trade Name Model 43UV560H-UA, 43UV570H-UA, USA, Commercial User 1-888-865-3026 49UV560H-UA, 49UV570H-UA, CANADA 1-855-286-2456 55UV560H-UA, 55UV570H-UA, 65UV560H-UB, 65UV570H-UB The model and serial numbers of the TV are located Responsible LG Electronics Inc.
  • Page 29 OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
  • Page 30 KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 31 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 32 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
  • Page 33 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Page 34 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 35 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 36 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
  • Page 37 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
  • Page 38 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
  • Page 39 11 11 EXTERNAL CONTROL DEVICE SETUP 2. Tune to the BS (ISDB-BS) channel 30. 24. Input select (Command: x b) Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
  • Page 40 EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.
  • Page 42 ESPAÑOL Guía Rápida de Configuración 43UV570H Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. 49UV560H FRANÇAIS 49UV570H Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y 55UV560H reporter ultérieurement.
  • Page 43 ENGLISH Read Safety & Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
  • Page 44 M.P.I.
  • Page 45 M.P.I. GAME CONTROL / M.P.I.
  • Page 46 HDMI IN...
  • Page 48 (38.3) (38,3) (24.6) (24,6) (11.9) (11,9) (22.4) (22,4) (3.1) (3,1) (27.4) (27,4) (20.2) (20,2) 43UV570H-UA 49UV560H-UA 1,107 1 107 79.4 79,4 14.55 14,55 11.3 11,3 1.2 A / 120 W 1,2 A / 120 W (43.5) (43,5) (27.6) (27,6) (11.9) (11,9) (25.3)
  • Page 49 (Pour les États-Unis et le Canada) (For USA and Canada only) Ce produit est conforme aux normes (Para Estados Unidos y Canadá) ENERGY STAR® lorsque le réglage This product qualifies for ENERGY STAR® in the factory default (Home d’usine par défaut (Résidentiel) est sélectionné.

This manual is also suitable for:

43uv570h43uv560h49uv570h55uv560h55uv570h65uv560h ... Show all