Yamaha XTZ690 Owner's Manual page 58

Periodic maintenance and adjustment
NO. ITEM
11 * Wheel bearings
Swingarm pivot
12 *
bearings
13 Drive chain
6
14 * Steering bearings
15 * Chassis fasteners
Brake lever pivot
16
shaft
Brake pedal pivot
17
shaft
Clutch lever pivot
18
shaft
Shift pedal pivot
19
shaft
CHECK OR MAINTENANCE JOB
• Check bearing for looseness or
damage.
• Check operation and for exces-
sive play.
• Lubricate with lithium-soap-
based grease.
• Check chain slack, alignment and
condition.
• Adjust and lubricate chain with a
special O-ring chain lubricant
thoroughly.
• Check bearing assemblies for
looseness.
• Moderately repack with lithium-
soap-based grease.
• Make sure that all nuts, bolts and
screws are properly tightened.
• Lubricate with silicone grease.
• Lubricate with lithium-soap-
based grease.
• Lubricate with lithium-soap-
based grease.
• Lubricate with lithium-soap-
based grease.
ODOMETER READING
1000 km 10000 km 20000 km
(600 mi) (6000 mi) (12000 mi)
√ √
√ √
Every 50000 km (30000 mi)
Every 1000 km (600 mi) and after washing the motorcycle, riding in the rain or
riding in wet areas
√ √
√
√ √
√ √
√ √
√ √
√ √
6-6
ANNUAL
30000 km 40000 km
CHECK
(18000 mi) (24000 mi)
√ √
√ √
√
√
√ √
√ √
√ √
√ √
√ √
√
√
√
√
√