Yamaha XTZ690 Owner's Manual page 26

Instrument and control functions
Instantaneous fuel consumption
3
1
1. Instantaneous fuel consumption display
This function calculates the fuel con-
sumption under current riding condi-
tions.
The instantaneous fuel consumption
display can be set to either "km/L",
"L/100 km" when using kilometers.
To switch the fuel consumption units,
push the top set button until the mea-
surement units change. When using
miles, the fuel consumption unit is
"MPG".
 "km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
 "L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
 "MPG": The distance that can be
traveled on 1.0 Imp.gal of fuel un-
der the current riding conditions is
shown.
To switch the instantaneous fuel con-
sumption settings, push and hold the
left set button until the display chang-
es.
TIP
If traveling at speeds under 20 km/h
(12 mi/h), "_ _._" is displayed.
Average fuel consumption
1
1. Average fuel consumption display
3-11
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption can be
set to either "AVE_ _._ km/L", "AVE_
_._ L/100 km" when using kilometers.
To switch the fuel consumption units,
push the top set button until the mea-
surement units change. When using
miles, the fuel consumption is "AVE_
_._ MPG".
 "AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel is shown.
 "AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km is shown.
 "AVE_ _._ MPG": The average dis-
tance that can be traveled on
1.0 Imp.gal of fuel is shown.
To reset the average fuel consumption,
select it and while the digits flash push
the bottom set button until it is reset.
TIP
After resetting the average fuel con-
sumption, "_ _._" will be shown until
the vehicle has traveled 1 km (0.6 mi).