Test Boiler; Burner Equipment - Riello RS 310/E MZ FS1 Installation, Use And Maintenance Instructions

Forced draught gas burners

Table of Contents

4.9

Test boiler

The burner/boiler combination does not pose any problems if the

boiler is EC approved and its combustion chamber dimensions

are similar to those indicated in the diagram (Fig. 4).

If the burner must be combined with a boiler that has not been EC

approved and/or its combustion chamber dimensions are clearly

smaller than those indicated in the diagram, consult the manufac-

turer.

4.10

Gasket for gas train adaptor . . . . . . . . . . . . . . . . . . . . . . . . No. 1

Adaptor for gas train . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1

Screws for fixing the gas train adaptor: M 16 x 70 . . . . . . No. 4

Thermal insulation screen . . . . . . . . . . . . . . . . . . . . . . . . . No. 1

M 18 x 60 screws to secure the burner flange to the boiler No. 4

Cable grommets kit for optional electrical wiring input . . . . No. 1

M16 nuts to fix the gas elbow to the pipe coupling . . . . . . No. 8

Stud bolts M16X60 to fix the gas elbow to the pipe

coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1

Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1

Spare parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1

Technical description of the burner

The firing rates were set in relation to special test boilers, accord-

ing to EN 676 regulations.

In Fig. 4 you can see the diameter and length of the test combus-

tion chamber.

Example: RS 510/E MZ

Output 5000 kW - diameter 100 cm - length 5 m

20057548

Fig. 4

20079029

Table of Contents