Siemens SIMATIC NET SCALANCE M-800 Getting Started page 50

SCALANCE M-800 as DHCP server
2.1 Configuring dynamic IP address assignment
9. To enable the configured DHCP pool, select the check box in the "Enable" column.
10. Click on "Set Values".
Result
The DHCP server can assign up to 100 IP addresses from a set address band. This is only
possible if the connected devices are configured so that they obtain the IP address from a
DHCP server.
50
Getting Started, 07/2020, C79000-G8976-C337-09
SCALANCE M-800