Siemens SIMATIC NET SCALANCE M-800 Getting Started page 30

Connecting SCALANCE M-800 to WAN
1.9 Additional configuration steps with the SCALANCE M87x and SCALANCE M81x
Configure APN
1. Click on the "Operator" tab in the content area.
2. Specify the access data for the APN.
– If your mobile wireless provider is included in the table, no further configuration is
or
– In "Country List", select the country in which the device will be used.
– In "Provider List", select the appropriate mobile wireless provider. If a mobile wireless
or
– If your mobile wireless provider is not included in the table and not in the list of
– Complete the boxes PLMNID, Operator Name, APN, User Name (optional), Password
– To adopt the entry click on "Create" and "Set Values".
Result
The PIN number and the APN are configured. The M87x4 connects to the mobile wireless
network after approximately 30 seconds. You can check whether or not the connection is
established in "Inforrmation > Mobile > Overview".
30
necessary.
provider is listed more than once for a country, select the entry with the PLMNID that
matches the SIM.
providers, enable the entry "Manual". When the "Manual" entry is enabled, all other
entries are automatically ignored.
(optional) and Password Confirmation (optional).
Getting Started, 07/2020, C79000-G8976-C337-09
SCALANCE M-800