Siemens SIMATIC NET SCALANCE M-800 Getting Started page 38

Connecting SCALANCE M-800 to WAN
1.10 Additional steps in configuration with the SCALANCE M826 in 4-wire operation
6. In the navigation area click "Interfaces" > "SHDSL" > "Overview".
7. Enable the PME aggregation function.
When enabled, the SHDSL interfaces or the 2-wire cables are put together to form a
single connection with a higher transmission rate.
8. Click on "Set Values".
Result
The SHDSL connection is set up. The devices negotiate the connection parameters. This
means that the devices use the transmission rate at which the data can be sent and received
reliably.
38
Getting Started, 07/2020, C79000-G8976-C337-09
SCALANCE M-800