Unloading And Storage - Vexve Hydrox HCU Basic Installation, Operation And Maintenance Manual

3. Unloading and storage

Check that the content of the delivery is as
ordered. Check that the control unit and related
equipment have not been damaged during
transportation.
Store the control unit carefully before
installation, preferably in a well-ventilated, dry
place, on a shelf or a wooden grid to protect it
from rising damp.
Protect the cabinet's ingoing components
from sand, dust, water, moist and other
contamination.
Protect bare metal surfaces with anti-corrosive
agent before storage.
The control unit must be transported to the
installation site in a sturdy package. Do not
remove any protectors before installation.
Protect the control unit from dust and other
impurities.
Take the weight of the control unit and its
equipment into account when handling them.
The maximum storage time is two years.
6
Packaging:
Vexve's products are protected during
transportation with special packaging. The
packaging consists of environmentally friendly
materials that are easy to sort and recycle.
Recycling the packaging materials at
designated waste collection points is
recommended.
The following packaging materials are used:
wood, cardboard, paper, and polyethylene
sheets.
Recycling and disposal
Nearly all parts of the control unit are made
of recyclable materials. The material type is
marked on most parts. Separate recycling and
disposal instructions are available from the
manufacturer. The control unit can also be
returned to the manufacturer for recycling and
disposal against a fee.
www.vexve.com