Volvo V50 2010 Owner's Manual page 196

07 Wheels and tyres
Warning triangle* and spare wheel *
Putting the spare wheel* and jack* into
the cargo area
1. Crank the jack (3) to halfway in order that
the jack shall fit horizontally in the bracket.
2. Fold in the handle (6) and place the wheel
wrench (2) on the jack.
3. Put the jack (3) back in the hole on the right
(4). Fasten the spare wheel (1) in the hole
on the left (5).
Tools - returning into place
Tools and jack* must be returned into place in
the correct manner after use.
•
For cars equipped with spare wheel, the
jack must be cranked so that it fits into the
spare wheel.
•
For cars equipped with emergency punc-
ture repair kit, the jack must be fully
cranked together and returned into the
foam block.
IMPORTANT
07
The tools and jack* must be stored in the
intended location in the car's cargo area
when not in use.
*
196
Option/accessory, for more information, see Introduction.
First aid*
A case with first aid equipment is located in the
cargo area.