Volvo V50 2010 Owner's Manual page 109

Memory function
Buttons for memory function.
Store setting
1. Adjust seat.
2. Press and hold button M while pressing
button 1, 2 or 3 simultaneously.
Using a stored setting
Press one of the memory buttons 1–3 until the
seat stops. If you release the button then the
movement of the seat will stop.
Emergency stop
If the seat accidentally begins to move, press
any of the buttons to stop the function.
WARNING
Risk of crushing. Make sure that children do
not play with the controls.
Check that there are no objects in front of,
behind or under the seat during adjustment.
Ensure that none of the rear seat passen-
gers is in danger of becoming trapped.
Memory in remote control key
The settings for the driver's seat are stored in
the memory for the remote control key with
which the car is locked. When the car is
unlocked with the same remote control key the
driver's seat adopts the stored settings when
the driver's door is opened.
NOTE
The remote control key memory is inde-
pendent of seat memory.
Tipping the front seat backrest*
The passenger seat backrest can be folded
forward to make room for long loads.
1. Move the seat as far back as possible.
2. Adjust the backrest to an upright position
90 degrees.
3. Lift the catches on the rear of the backrest
while folding it forwards.
4. Push the seat forward so that the head
restraint "locks" in under the glovebox.
*
Option/accessory, for more information, see Introduction.
04 Interior
Front seats
04
``
109