Advertisement
Cutouts
TIP:
You can use the mounting plate as a template.
NOTE: The trim has notches for removal that need to face downward so they are unseen once the trim is
installed. For this reason the mounting plate is NOT REVERSIBLE. Make sure the PowerHub is on the
LEFT and the MediaHub or MiniClip is on the RIGHT.
NOTE: The cutout diagrams below are scaled and NOT THE ACTUAL SIZE so should NOT be used directly as
templates.
PowerHub with MediaHub or MiniClip (CKIT-MHMN-EXTxx and CKIT-MHMC-EXTxx)
Pilot holes
NOTES:
PowerHub Mini with MediaHub or MiniClip (CKIT-MHMN2-EXTxx and CKIT-MHMC2-EXTxx)
Pilot holes
NOTES::
Extender Trim Installation Guide.
134.4 [5.29]
149.2 [5.87]
Dimensions shown as mm [in].
Drill 1mm [0.04in] pilot holes for wood screws at points indicated.
86.87 [3.42]
100.2 [3.94]
Dimensions shown as mm [in].
Drill 1mm [0.04in] pilot holes for wood screws at points indicated.
30.1 [1.19]
51 [2.01]
60.3 [2.37]
27.81 [1.09]
51 [2.01]
60.3 [2.37]
Advertisement
