Olivetti PGL2540 Operation Manual page 50

Installing and Setting up the Machine > Network Setup
11Set the default gateway.
NOTE
You can set any value between 000 and 255.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
12Select the [OK] key.
13[▲] [▼] key > [Auto-IP] > [OK] key
14[Off] > [OK] key
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the
machine OFF and then ON.
Restart Printer (page 6-23)
NOTE
Ask your network administrator for the IP address in advance, and have it ready when you
configure this setting.
In the following cases, set the IP address of DNS server on the Embedded Web Server RX.
• When using the host name with "DHCP" setting set to "Off"
• When using the DNS server with IP address that is not assigned by DHCP automatically.
Setting the IP Address of the DNS Server, refer to the following:
Embedded Web Server RX User Guide
2-18