Olivetti PGL2540 Operation Manual page 144

Setup and Registration (System Menu) > System Menu
Item
Error Clear Timer
FormFeed TimeOut
Sleep Level Set.
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Sleep Level Set.] > [►] key
Item
Sleep Level (models except for
Europe)
Network
*1
Card Reader
*1 Displayed only when the optional Card Authentication Kit is activated.
Power Off Rule (models for Europe)
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Power Off Rule] > [►] key
Select whether or not the machine enters Power Off mode.
Item
Network
USB Cable
USB Host
RAM Disk
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Err. Clear] is set to [On].
Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed. When the
preset timeout passes, the machine automatically prints paper. The options are between 5 and
495 seconds.
Value: 5 to 495 seconds (in 5 second increments)
Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
Set whether to use the Energy Saver mode for Network.
Value: Off, On
Set whether to use the Energy Saver mode for Card Reader.
Value: Off, On
NOTE
When the machine enters Energy Saver, the ID card cannot be recognized.
Set whether or not the machine enters Power Off mode for Network.
Value: Off, On
Even when [Network] is set to [Off], if the machine does not communicate with the other
devices, the machine will enter Power Off Mode.
Set whether or not the machine enters Power Off mode for USB cable.
Value: Off, On
Even when [USB Cable] is set to [Off], if the machine does not communicate with the other
devices, the machine will enter Power Off Mode.
Set whether or not the machine enters Power Off mode for USB host.
Value: Off, On
Set whether or not the machine enters Power Off mode for RAM Disk.
Value: Off, On
6-20
Description
Description
Description