Olivetti PGL2540 Operation Manual page 143

Setup and Registration (System Menu) > System Menu
Error Handling
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Error Handling] > [►] key
Select whether to cancel or continue the job when error has occurred.
Item
Duplex
Paper Mismatch
MP Tray Empty
Timer
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Timer] > [►] key
Configure settings related to the time.
Item
Auto Panel Reset
Panel Reset Timer
Sleep Timer
Auto Error Clear
Select what to do when duplex printing is not possible for the selected paper size and media type.
Value
Off: Printed in 1-sided
On: Message to cancel printing is displayed.
Select what to do when the selected paper size or type does not match paper size or type
loaded in the specified paper source while printing from the computer by specifying the
cassette or multipurpose tray.
Value
Off: The setting is ignored and the job is printed.
On: Message to cancel printing is displayed.
Turn this setting to [On] if you want the error displayed when the multipurpose tray is
configured as the default paper source, and there is no paper in the multipurpose tray, or turn it
to [Off] not to have the error displayed.
Value: On, Off
If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
The time allowed to elapse before the panel is reset is set with the following:
Panel Reset Timer (page 6-19)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Set amount of time before entering Sleep.
Value
For Europe
1 to 60 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Auto Sleep (page 2-27)
If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value: Off, On
6-19
Description
Description