Checking The Recorded Picture - Sony DVCAM DSR-200P Operating Instructions Manual

Checking the recorded picture

Using EDITSEARCH, you can review the last recorded scene or check the recorded
picture in the viewfinder.
( 1) Set the POWER switch to ON and then set CAMCORDER/PLAYER to
CAMCORDER.
( 2) Turn STANDBY up to STANDBY.
( 3) Press the – ( Œ) side of EDITSEARCH momentarily; the last few seconds of the
recorded portion play back (Rec Review).
Hold down the – side of EDITSEARCH until the digital camcorder goes back to the
scene you want. The last recorded portion is played back. To go forward, hold
down the + side (Edit Search).
1
POWER
OFF ON
CAMCORDER
PLAYER
3
EDITSEARCH
To stop playback
Release EDITSEARCH.
To begin re-recording
Press START/STOP. Re-recording begins from the point you released EDITSEARCH.
Provided you do not eject the cassette, the transition between the last scene you
recorded and the next scene you record will be smooth.
Note on the EDITSEARCH
If you press EDITSEARCH fully, the playback speed doubles.
2
START/STOP
LOCK
STANDBY
PHOTO
STANDBY
EDITSEARCH
EDITSEARCH
DSR-200P CE 3-858-622-12(1). E
33