Advertisement
9
Mounting the Access Point
Cisco Aironet 1810W series access points can be mounted directly on the wall, to numerous global
wall junction standards, or on a desk.
Table 1
Access Point Mounting Options
Type of Mounting
Wall-mount installation on a single gang junction
box or multiple international standards.
See the
"Mounting the AP on a Wall" section on
page
19.
Wall-mount installation directly on wall, where
standard junction boxes are not available.
See the
"Mounting the AP on a Wall" section on
page
19.
Table-mount installation.
See the
"Mounting the AP on a Table or
Horizontal Surface" section on page
18
Mounting Bracket or Kit to be Used
AIR-AP-BRACKET-W2
This bracket is shipped with the access point as
standard. A spare can also be ordered from
Cisco.
AIR-AP1810W-KIT= spacer kit
This is kit includes an RJ-45 jumper cable and is
separately available from Cisco.
AIR-OEAP1810-CRD= cradle kit
This is kit includes a back cover, RJ-45 jumper
25.
cable and is separately available from Cisco.
Advertisement
