Advertisement
Quick Links
Advertisement
Related Manuals for Walker Edison Mission BWTOTMS
Summary of Contents for Walker Edison Mission BWTOTMS
- Page 1 Item #: BWTOTMS Révisé en 12/2017 Revised 12/2022 V-3 2018...
- Page 2 37 1/2 - 38 1/2 When using this item in the bunk bed configuration, use bed with the warning stickers as the bottom bunk.
-
Page 3: Parts List
Parts List... -
Page 4: Hardware List
Hardware List Ref. Qty. 1/4x100mm 7x100mm 7x50mm 10x100mm 10x40mm 4,0x50mm 4,0x30mm Hex Key... -
Page 5: Assembly Options
Assembly Options Option A Twin over Twin Bunk Bed Option B Conversion into Two Single Twin Beds... - Page 6 Step 1 10x40 Insert wooden dowel (E) in parts (6, 9, 10, 11, 12, 14, 18, 20)
- Page 7 Step 2 Use Hex key (K) to attach parts (3, 4, 6, 8) together using screw (G) and bolt (B) Step 3 Use Hex key (K) to attach parts (3, 5, 8, 20) together using screw (G) and bolt (B)
- Page 8 Step 4 Use Hex key (K) to attach parts (1, 2, 6, 7) together using screw (G) and bolt (B). Do this step twice. Step 5 Use Hex key (K) and bolt (C) to attach parts (16, 17) to parts (18).
- Page 9 Step 6 Use bolts (A, B), Nut (L) and Hex Key (L) to attach leg (3) to part (9), and leg (4) to parts (11, 12) Step 7 Use bolts (A, B), Nut (L) and Hex Key (L) to attach leg (3) to parts (11, 12), and leg (5) to part (9)
- Page 10 Step 8 When using this item in the bunk bed configuration, use bed with the warning stickers as the bottom bunk. Use bolts (A, B), Nut (L) and Hex Key (K) to attach leg (1) to parts (9), and leg (2) to part (10). Step 9 Use bolts (A, B), Nut (L) and Hex Key (K) to attach leg (1) to parts (10), and leg (2) to part (9).
- Page 11 Step 10 2 " ``INSTALL SLAT KIT WITH SPACER TAPE ON TOP (FACING UP)`` Presure can be applied to cross beams (9,10, 11) to ensure that mattress supports (17) fit evenly between cross beams 2" The rst slat must be xed fi...
- Page 12 Step 11 Attach the top bunk to the bottom bunk using wooden dowel (D). Step 12 Use screw (H) to secure top bunk to bottom bunk. P.12...
- Page 13 Step 13 Use Hex Key (K) and Bolt (C ) to attach ladder to the side of bunk bed frame. P.13...
- Page 14 Step 14 Use Hex Key (K) to attach guard rails (14) to frame with bolts (B, C). Step 15 3 7 " 9 2 7 m 2 9 " 7 3 5 m Use screw (H) to attach part (15) to frame. P.14...
- Page 15 Step 16 Option B Conversion into Two Single Twin Beds P.15...
- Page 16 Step 17 Loosen the appropriate hardware and remove the ladder from the bunk bed assembly. P.16...
- Page 17 Step 18 P.17...
- Page 18 Step 19 Carefully lift the upper bunk off of the lower bunk. P.18...
- Page 19 Step 20 Loosen the appropriate hardware of the upper bunk so that the guardrails and leg assemblies are no longer connected to the bed assembly. P.19...
-
Page 20: Final Assembly
Step 21 Step 22 Option B Final Assembly P.20...