Switching The Fuser Pressure - Olivetti d-Copia 3003MF Service Manual

(2) Switching the fuser pressure

The fuser pressure may be decreased to suppress the print quality problems such as paper creases and
curls.
It must be cautioned that decreasing the fuser pressure could cause loose toner fusing.
Procedure
1. Remove the cassette (See page 1-5-6).
2. Open the duplex cover.
3. Slide the fuser lever R and L.
Normal: Flush with the front of the
machine.
Fuser pressure decreased: Flush with
the rear of the machine.
Service Manual
Fuser
lever R
Duplex
cover
Normal
Fuser pressure
decreased
Fuser lever L (R)
Figure 1-5-54
1-5-36
2MH/2MJ/2MK/2ML
Fuser lever L
Fuser lever L (R)
Y113860-1